Experimental SRH60-70 Homogenizer
| Model |
SRH 60-70 |
| Rated flow rate Q l/h |
60 |
| Minimum test volume (ml) |
200 |
| Maximum working pressure m Mpa |
70 |
| Continuous working pressure P Mpa |
0-56 |
| Power source KW |
3(380V-50HZ) |
| Weight Kg |
260 |
| Overall dimensions L×W×H CM |
70×40×115 |
Working principle and purpose
The SRH60-70 experimental high-pressure homogenizer utilizes a suspension under high-pressure conditions, and through an adjustable flow limiting gap process, it combines the effects of pressure loss, expansion, explosion, shear, and high-speed impact to crush particles and oil droplets in the liquid into very small sizes, with a diameter of 0.01~2um and an average of<1 μ m, while forming an ideal emulsion or dispersion. This process integrates the functional principles of ultrasound, crusher, colloid mill, ball mill, etc. (as shown in the following figure). The stability, consistency, mixing, absorbability, nutritional value, shelf life, taste, color, and shelf life of the product can all be achieved in homogenization.
Top Ten Advantages
1, The flow rate is sufficient, and the flow rate indicated on the nameplate is only slightly higher. Technically ensure that the pressure increases and the flow rate remains unchanged.
2, Good crushing particle size, with a diameter of 0.01-2 microns. (Proper selection of pressure)
3, The pressure is stable, and the pointer swing of the pressure gauge is within 1Mpa, that is, P swing ≤ 1Mpa. The one-way valve is durable and reliable, ensuring stable pressure and sufficient flow.
4, Low noise, the local transmission gear is installed on the curved arm, symmetrical transmission, small bending moment, and good balance; The shaft end is a rolling bearing, and the bearing shell is made of special alloy material, which becomes harder as it runs and never changes. The transmission sound is lower than the motor sound.
5, Reliable sealing and no leakage of slurry. Plunger seal, using the fourth generation square self positioning sealing ring X4310, wear-resistant and efficient, with a high temperature resistance of up to 150 ºC; The gland adopts radial sealing, and the advantage is that the sealing effect increases with the increase of pressure.
6, Vulnerable parts have a long service life, are resistant to strong acids and alkalis (NaOH, HNO3 ≤ 5%), and are suitable for CIP disinfection. Especially in dairy production with secondary sterilization, there is no risk. The one-way valve and plunger are made of special hard materials, which are durable. Various sealing components are made of special materials and should not be replaced frequently.
7, Material saving, solid material for homogenizing valves and one-way valves, can be repeatedly ground and used. If used proficiently, the material cost is only 1/5-12 of the first generation homogenizer.
8, Oil saving, the transmission of this machine adopts splash lubrication. During the first grinding period, the oil should be changed every 750 hours. Starting from the second time, the oil should be changed once a year based on a three shift calculation.
9, Easy to disassemble and maintain, and easy for workers to operate and maintain.
10, Beautiful appearance, in compliance with international food hygiene requirements.
Audited Supplier 
){kind=link}
){kind=link}